Part 2<\/a><\/p>\n\n\n\n Part 3<\/a><\/p>\n\n\n\n And a cover of Never Gonna Give You Up:<\/p>\n\n\n\n Never Gonna Give You Up on XP-80<\/a><\/p>\n\n\n The Roland XP-80 is a flagship synthesizer \/ music workstation released in the 1990s. Featuring 64 concurrent voices and a maximum 40MB of waveform memory when fully extended, this synth is a powerhouse.<\/p>\n\n\n\n I acquired a non-working XP-80 in August, 2021. I bought it for CN\uffe5800 (about US$150), and it was in overall great condition.<\/p>\n\n\n\n By the way this synth weights a ton. A quick measure on the body weight scale showed more than 13kg (nearly 30lbs).<\/p>\n\n\n The unit is a 110V unit rewired for 220V operation. A quick test shows that the machine cannot boot, and the LCD screen flickers with lines on it. Some LEDs would light up, which I and some other believes are error code. But the service manual said nothing about it and without the embedded software source code it’s impossible to know what it means.<\/p>\n\n\n\n I put some cheap pillows from IKEA between the synth and the desk to cushion it. After tearing it down first thing I noticed is the dead CR2032 battery. I replaced the battery with a new one, and it still won’t boot. <\/p>\n\n\n\n Since the most common problem around this machine is power supply issue caused by dried out capacitors, I tested the supply rails with DMM and oscilloscope, everything checked out fine.<\/p>\n\n\n\n Next I soldered wires onto the PSU board, to use external power supply to test the machine. The board still didn’t boot. I kept the wires though, as further testing could be powered this way instead of using mains AC.<\/p>\n\n\n\n Based on the changing current at different stages during start-up, I assume the board has some action and is not totally fried.<\/p>\n\n\n At that time I didn’t have a clear diagnosis so I went on to replace all electrolytic capacitors on all boards, which are infamous for drying out on this machine. I removed all PCBs from the synth, and measured out the diameter of some capacitors, since a certain voltage and capacitance combination may yield more than one dimension.<\/p>\n\n\n\n I bought replacement parts on LCSC, and replaced all electrolytic capacitors.<\/p>\n\n\n\n Of course this didn’t help the repair at that time, but in replacing all electrolytics made sure the machine will correctly function for years to come. <\/p>\n\n\n\n In the process I damaged a SMT film capacitor on the main board which is a critical part in the output filtering circuit and is very expensive. I had to buy a new one and replace it.<\/p>\n\n\n I went on to probe the data lines of the CPU, a Hitachi RISC MCU, with an oscilloscope. There were some weird waveform on some of the data lines, which I didn’t think much of it. I was assuming since the OSes were not booted, some chip may not be in a defined state so the output may be irregular.<\/p>\n\n\n\n In addition, when I tried to mount the PCB back to the chassis without the keybed installed, I couldn’t install the screws as holes were not aligning properly which I found to be very strange.<\/p>\n\n\n\n <\/p>\n\n\n Then one day after I had a dinner together with a YouTuber who has more than 100,000 subscribers, I came back and decided to re-solder all SMT chips. After I did that, the synth just magically booted.<\/p>\n\n\n\n It turns out the strange waveform on the data lines are probably due to a bad SMT solder joint in either the CPU or more likely, the NAND flash. The waveform sort of looked like a RC waveform which also makes sense.<\/p>\n\n\n\n The bad contacts were likely caused by mechanical stress, induced when previous owner or repair personnel (I’ll explain this later) removed the keybed and leaving the PCB on the chassis. The keybed shares some mounting point with the PCB. Without the keybed mounted, some mounting plates are in a tensioned state and put all the stress on the PCB, causing it to warp. This explained why the PCB couldn’t be installed when the keybed was removed.<\/p>\n\n\n\n I couldn’t remember where I saw it, but there was a forum post where the OP said his XP-80 would work when the back cover is removed, and won’t boot when back cover is installed. He suspects EMI issues. Now we know it’s probably caused by mechanical stress.<\/p>\n\n\n As the machine now boots fine, I tried to play something on it. Turns out some keys weren’t working, and were marked on the keyboard.<\/p>\n\n\n\n Further testing with a DMM revealed that some connection is broken between the keybed PCB and the main board. As keys are arranged in a scan array, keys are broken at set interval.<\/p>\n\n\n\n The previous repair attempt successfully detected the broken contact, since they marked all diodes that does not connect to the main board. <\/p>\n\n\n\n But they never found where it is, and in the process put too much stress on the main PCB. The problem was a cracked solder joint on the FPC connector on the keybed board.<\/p>\n\n\n\n After re-soldering the joint, all keys went back to working order. I wrote my repair date next to the previous repair marking, which was 17 years ago.<\/p>\n\n\n\n Another problem was that the rotary encoder was acting up. It was a Panasonic EC16 with plastic shaft. I bought a similar looking one<\/a> with metal shaft but turns out to have different pin shape. I had to modify it by cutting its pins and connect it to the PCB pads with pins extracted from pin headers.<\/p>\n\n\n\nTable of Contents<\/h2>\n
\n
<\/figure>\n\n\n\n
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/\u6355\u83b7-1.png\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/out.mp4_20220722_004634.322.jpg\")
First Impression<\/h1>\n\n\n
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/out.mp4_20220722_004641.604.jpg\")
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/out.mp4_20220722_004600.648.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/out.mp4_20220722_004650.722.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8010.MP4_20220722_005015.522.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8010.MP4_20220722_011514.409.jpg\")
<\/figure>\n<\/figure>\n\n\nTesting the Power Rails<\/h1>\n\n\n
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/\u6355\u83b71.png\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/out.mp4_20220722_004841.112.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/out.mp4_20220722_004846.981.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8008.MP4_20220722_011937.680.jpg\")
<\/figure>\n\n\n\nReplacing All Electrolytic Capacitors<\/h1>\n\n\n
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8022.MP4_20220722_005136.864.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8037.MP4_20220722_005154.182.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8042.MP4_20220722_012846.767.jpg\")
<\/figure>\n\n\n\nMore diagnosing<\/h1>\n\n\n
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/\u6355\u83b75.png\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8014.MP4_20220722_005108.943.jpg\")
<\/figure>\n\n\n\nLuck Strikes<\/h1>\n\n\n
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8051.MP4_20220722_005307.569.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8054.MP4_20220722_005319.821.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/DJI_0219_001.MP4_20220722_021230.043.jpg\")
<\/figure>\n\n\n\nMore Problem<\/h1>\n\n\n
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8082.MP4_20220722_014308.199.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/Keyboard-Matrix1.png\")
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8052.MP4_20220722_014312.245.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8043.MP4_20220722_005413.085.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8048.MP4_20220722_005346.135.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8064.MP4_20220722_005756.799.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8066.MP4_20220722_005841.291.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8066.MP4_20220722_005907.472.jpg\")
<\/figure>\n<\/figure>\n\n\nImprove with a USB Floppy Emulator<\/h1>\n\n\n
![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8057.MP4_20220722_005517.250.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8058.MP4_20220722_005508.195.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8059.MP4_20220722_005541.101.jpg\")
<\/figure>\n<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/2021-08-31_22-17-14.mp4_20220722_005709.318.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8062.MP4_20220722_005605.813.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/DJI_0225_002.MP4_20220722_165631.198.jpg\")
<\/figure>\n\n\n\n![\"\"](\"https:\/\/www.ddzheng.cc\/wp-content\/uploads\/2022\/07\/MVI_8085.MP4_20220722_010008.173.jpg\")
<\/figure>\n\n\n